MOCA 7PK1755 EPDM Serpentine Belt Fits 2004-2008 Acura TSX & 2007-2009 Honda CR-V 2.4L

Name: MOCA 7PK1755 EPDM Serpentine Belt Fits 2004-2008 Acura TSX & 2007-2009 Honda CR-V 2.4L
Brand: MocaAutoParts
SKU: S-ESP0386
Price: 14.73 USD
Availability: OutOfStock

by MocaAutoParts

S-ESP0386

Out of stock

$14.73

Shipping calculated at checkout.

Fully secure checkout
Trusted by thousands
Rated and reviewed

Shop safely

Secure your shopping experience with various safe and trusted payment methods.

Shop safely with us

Up to 8% offSold out

DESCRIPTION

Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag.
Manufacturer Warranty 1 Year
Inch Number 690K7
Rib Quantity 7
Top Width 0.98
OE/OEM Part Number 7PK1755
Fitment Type Direct Replacement
Material EPDM
Effective Length (in) 69
Belt Type Serpentine
Interchange Part Number 7PK1755
Manufacturer Part Number S-ESP0386
Brand MOCA
Effective Length (mm) 1755mm
Type Serpentine Belt
Warranty 1 Year
UPC 766825088738

Product Description

Product description

Package Includes: 1 Serpentine Belt

Part Numbers: 7PK1755

Car Application:

For Asuna:

2004-2008 for Acura TSX 2.4L (Accessory Drive)

For Honda:

2007-2009 for Honda CR-V 2.4L (Accessory Drive)

Note:

1.Please kindly note, if there were something wrong with the products, please do not hesitate to leave a message to us, we will solve it immediately when we receive.

2.Please ensure this item fits for your vehicle before purchasing (Check Fitment Data Above or see description below or ask our staff for help). Returned because of ordering by mistake, we will not bear the shipping fee. Thank you.

Measure Serpentine Belt Length Method 1: Using an Existing Belt


Mark a line across the belt with a white marker	Line up a measuring tape with the line on the belt	Wrap the measuring tape around the belt until it meets the mark	Hold your finger where the tape meets the mark and note the distance

Measure Serpentine Belt Length Method 2: Finding the Size Using the Pulleys


Use string if the belt is on the pulley or if there is no belt	Hold 1 end of the string on top of the belt or 1 of the pulleys	Wrap the string around the pulleys until it meets the other end	Mark the string where it meets the other end and remove it. Then lay the string flat and measure the distance between the end and the mark

How to Replace a Serpentine Belt

Pull the hood release inside the cabin of the vehicle. To access the serpentine belt, you will need to open the hood of the vehicle

Disconnect the battery. You should always disconnect your battery before starting an automotive project

Locate the serpentine belt. Depending on the engine in your vehicle, the serpentine belt may be located at the front of the engine bay, or it may be along one side. There may be engine covers in the way, so be prepared to remove them if need be

Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run:

Look in the owner's or service manual for your specific year, make and model vehicle for a diagram

You can also take a picture of the existing belt with your cell phone to use as a guide when installing the new one

Use a wrench to relieve the auto tensioner, loosen the bolts in the alternator bracket. As you loosen the bolts, the tension on the belt will likely move the alternator toward the engine and relieve the pressure

Then pull the belt off of the pulleys. With the tension relieved from the belt, pull it off of the pulley that has been placing tension on it, then remove it from the around the rest of the pulleys on the engine

If the belt is severely damaged, be sure to remove any parts that may have come off of it as well

Compare the new belt to the old one and make sure it is right one. Look at the new belt in comparison to the old one to be sure they are the same width and have the same number of ribs going across the belt horizontally

Route the belt through the pulleys. Run the new belt through the pulleys in exactly the same way the old one was. Refer to the belt diagram in your vehicle's owner's manual or the picture you took of the belt before removing it to guide you

Then apply pressure on the auto tensioner and put the belt over it.

Any questions?

Address frequently asked questions about this product to minimize any concerns or uncertainties that might deter a customer from making a purchase.

Does it come with a warranty?

Add your collapsible row content here. If it's set to open one row at a time, consider keeping the content in each row about the same length.

What happens if I don't like it?

Add your collapsible row content here. If it's set to open one row at a time, consider keeping the content in each row about the same length.

How fast is shipping?

Add your collapsible row content here. If it's set to open one row at a time, consider keeping the content in each row about the same length.

What's the returns policy?

Add your collapsible row content here. If it's set to open one row at a time, consider keeping the content in each row about the same length.

MOCA 7PK1755 EPDM Serpentine Belt Fits 2004-2008 Acura TSX & 2007-2009 Honda CR-V 2.4L