MOCA 2PCS Serpentine Belt 4PK885 4PK990 for 1995-1998 Mazda Protege 1.5L

$17.58

MOCA 2PCS Serpentine Belt 4PK885 4PK990 for 1995-1998 Mazda Protege 1.5L

MOCA 2PCS Serpentine Belt 4PK885 4PK990 for 1995-1998 Mazda Protege 1.5L

$17.58

PCS:

1PCS

5PCS (5% OFF) Crossed Out

10PCS (8% OFF) Crossed Out

DESCRIPTION

Condition: New
Fitment Type: Direct Replacement
Placement on Vehicle: Front
Material: EPDM Rubber
UPC: 704619973792
Brand: MOCA
Warranty: Lifetime
Manufacturer Part Number: S-2*PKK351
Interchange Part Number: 4PK890, 4PK990

Product Description

Product description

"For Mitsubishi:

1992 & 1995 Expo L4 2.4L (Alternator & Water Pump) / 1996 Eclipse L4 2.4L (Alternator & Water Pump) / 1997 Eclipse L4 2.0L (Alternator & Water Pump) / 1997 Galant L4 2.4L (Fan & Power Steering) / 1997 Montero V6 3.5L (Power Steering) / 1998 Montero V6 3.5L (Compressor & Power Steering)

For Bmw:

1995 318I L4 1.8L (Compressor) / 1995 318Is L4 1.8L / 1996 318Is L4 1.9L (Air Conditioning) / 1996 318Ti L4 1.9L (Compressor) / 1998 318I L4 1.9L (Air Conditioning) / 1998 Z3 L4 1.9L (Compressor)

For Eagle:

1989 & 1991 Summit L4 1.5L / 1992 & 1994 Summit L4 2.4L (Alternator & Water Pump) / 1990 Talon L4 2.0L (Alternator & Water Pump) / 1997 Talon L4 2.0L (Alternator & Water Pump)
1991 2000 Gtx L4 2.0L (Alternator) / 1993 2000 Gtx L4 2.0L (Alternator & Water Pump)

For Kia:

1995 & 1997 Sephia L4 1.6L (Power Steering) / 1995 Sephia L4 1.8L (Alternator & Water Pump) / 1995-1997 Sephia L4 1.8L (Alternator) / 1996-1997 Sephia L4 1.6L (Alternator & Water Pump) / 2013 Soul L4 2.0L (Air Conditioning)

For Mazda:

1990 323 L4 1.6L (Power Steering) / 1991 323 L4 1.6L (Air Conditioning & Power Steering) / 1994 Mx-3 L4 1.6L (Alternator) / 1995 & 1998 Protege L4 1.8L / 1998 Protege L4 1.5L (Air Conditioning & Power Steering) / 1995 Protege L4 1.8L (Alternator & Water Pump)

For Hyundai:

1992 & 1994-1997 Sonata L4 2.0L (Alternator & Water Pump) / 1992 & 1995-1998 Sonata L4 2.0L (Alternator & Fan) / 2013 & 1993-1995 Elantra L4 1.8L (Alternator)

For Plymouth:

1990 & 1992 & 1994 Colt L4 1.5L (Alternator & Fan) / 1994 Laser L4 2.0L (Alternator) / 1997 Neon L4 2.0L (Air Conditioning & Power Steering)

For Subaru:

1988 Xt H4 1.8L (Air Conditioning & Power Steering & Water Pump) / 1989 Xt H4 1.8L (Air Conditioning)

For Chrysler:

1998 Sebring V6 2.5L (Compressor)

For Dodge:

1998 Avenger V6 2.5L (Alternator)

For Jaguar:

1994 Xj6 L6 4.0L (Accessory Drive Belt & Alternator & Water Pump)

For Mercury:

1996 Tracer L4 1.8L (Alternator)

For Nissan:

1993 Maxima V6 3.0L (Alternator & Water Pump)"

Measure Serpentine Belt Length Method 1: Using an Existing Belt


Mark a line across the belt with a white marker	Line up a measuring tape with the line on the belt	Wrap the measuring tape around the belt until it meets the mark	Hold your finger where the tape meets the mark and note the distance

Measure Serpentine Belt Length Method 2: Finding the Size Using the Pulleys


Use string if the belt is on the pulley or if there is no belt	Hold 1 end of the string on top of the belt or 1 of the pulleys	Wrap the string around the pulleys until it meets the other end	Mark the string where it meets the other end and remove it. Then lay the string flat and measure the distance between the end and the mark

How to Replace a Serpentine Belt

Pull the hood release inside the cabin of the vehicle. To access the serpentine belt, you will need to open the hood of the vehicle

Disconnect the battery. You should always disconnect your battery before starting an automotive project

Locate the serpentine belt. Depending on the engine in your vehicle, the serpentine belt may be located at the front of the engine bay, or it may be along one side. There may be engine covers in the way, so be prepared to remove them if need be

Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run:

Look in the owner's or service manual for your specific year, make and model vehicle for a diagram

You can also take a picture of the existing belt with your cell phone to use as a guide when installing the new one

Use a wrench to relieve the auto tensioner, loosen the bolts in the alternator bracket. As you loosen the bolts, the tension on the belt will likely move the alternator toward the engine and relieve the pressure

Then pull the belt off of the pulleys. With the tension relieved from the belt, pull it off of the pulley that has been placing tension on it, then remove it from the around the rest of the pulleys on the engine

If the belt is severely damaged, be sure to remove any parts that may have come off of it as well

Compare the new belt to the old one and make sure it is right one. Look at the new belt in comparison to the old one to be sure they are the same width and have the same number of ribs going across the belt horizontally

Route the belt through the pulleys. Run the new belt through the pulleys in exactly the same way the old one was. Refer to the belt diagram in your vehicle's owner's manual or the picture you took of the belt before removing it to guide you

Then apply pressure on the auto tensioner and put the belt over it.

Search for Auto Parts

My shopping cart

MOCA 2PCS Serpentine Belt 4PK885 4PK990 for 1995-1998 Mazda Protege 1.5L

PCS:

Product Description

Product description

Measure Serpentine Belt Length Method 1: Using an Existing Belt

Measure Serpentine Belt Length Method 2: Finding the Size Using the Pulleys

How to Replace a Serpentine Belt

Related products